telco instruction Archives

26 Apr

Rooftop Antenna Structure Design

Posted by maratus
Rooftop Antenna Structure Design, telco instruction, telecom Australia
Leave a comment

If the antenna structure is on a rooftop, the following factors must be considered: • Determine which equipment is to be mounted on the rooftop for each sector. • Determine where the antennas are to be...

12 Jul

Telco

What is As Built Drawings in Telecom Industry

Posted by maratus
As Built Drawings, dsl package in telco, maratustech, Telco, telco drafting, telco instruction, telecom, What is As Built Drawings in Telecom Industry
Leave a comment

As Built Drawings instruction The Supplier’s QMP must set-out a process for the production of the Site As-Built drawings. As-built drawings are to be produced for all site works that involve any external works or...

04 Jul

Telco

Optus Not For Construction Drawings

Posted by maratus
drawing, optus, Optus Not For Construction Drawings, telco drafting, telco drawing, telco instruction
Leave a comment

NOT FOR CONSTRUCTION drawings are occasionally used to acquire (in property terms) the nominated preferred candidate site. The NFC site package includes a site layout and set-out, a site elevation, and a cover sheet....

21 Jun

Telco

What is GPS Antenna in Telco Industry

Posted by maratus
gps, gps antenna, maratustech, Telco, telco in Australia, telco industry, telco instruction
Leave a comment

GPS Antenna Certain technologies will require the installation of a GPS antenna for synchronization. As part of the deployment a GPS antenna needs to be installed externally. Optus is responsible to supply and install the...

06 Jun

Telco

RRU General

RRU installation instruction in EJV Telco sites Every installation scenario must be assessed individually with special consideration in mind of ongoing maintenance of hardware from an operations perspective. Any RRU installations which will have an...

05 Jun

Telco

Maximum feeders through a standard gland plate

Posted by maratus
Maximum feeders through a standard gland plate, optus, telco gland plate, telco instruction, vodafone, what is gland plate
Leave a comment

Maximum feeders through a standard gland plate Standard sized antenna gland plates (600mm x 400mm) have various existing configurations. Refer to each operator's Deployment Guideline for the appropriate site solution. On a site by site basis,...

Shopping cart

Tag Archives: telco instruction

Rooftop Antenna Structure Design

What is As Built Drawings in Telecom Industry

Optus Not For Construction Drawings

What is GPS Antenna in Telco Industry

RRU General

Maximum feeders through a standard gland plate

Nokia Equipment Revit Family

Antenna Azimuths

BIM in the Telco industry

5G Component list for eJV telco sites

Telecom Shroud Cover